Analysis
Formula 1 Silverstone July testing
Testing tech analysis: Renault's suspension focus
Matt Somerfield looks at the main tech developments seen during the post-British Grand Prix test at Silverstone.

Matt Somerfield
Edited: Jul 14, 2016, 12:14 PM
Copy link
Share on Viber

Giorgio Piola's F1 technical analysis
Giorgio Piola is the preeminent Formula 1 technical journalist. View our full selection of Giorgio's technical illustrative content
Renault
It's fair to say that the Enstone-based team has struggled thus far in 2016, and the light is a long way down the tunnel, with much of its focus aimed at improving next season.
Renault picked up development of the RS16 very late into its life, meaning the car is a compromise initially designed to house the Mercedes power unit.
A lack of budget in the last few seasons has meant development, be it aerodynamic or mechanical, has been limited, leading to a culture that needed redress.
Personnel and infrastructure changes have already been made and improvements should follow but it will take time, something the French manufacturer will be keen to reduce.

Sergey Sirotkin, Renault Sport F1 Team RS16 Test Driver
Photo by: XPB Images
Lotus became known for its gentile tyre handling with Kimi Raikkonen and Romain Grosjean at the helm, but this too seems to have been lost in recent times, as it struggles to maximise the performance of its car.
It's of no surprise then that at Silverstone we saw the team use an old friend, used to understand the kinematic differences between two suspension layouts and how the tyre performs.
The Kistler RoaDyn we can see fitted to the RS16's wheel has been used numerous times by the Enstone outfit to help them to improve chassis performance.
Last seen at a test in 2013 and used back in 2006, it measures wheel force, giving the engineers an insight into whether the forces on the car are representative of those seen on the rigs at the factory.
Toro Rosso

Sergio Sette Camara, Scuderia Toro Rosso STR11
Photo by: XPB Images
The performance of the Italian arm of the Red Bull F1 family is impressive this season, given both its limited budget and use of a 2015 Ferrari power unit, it was expected their season would fall away.
However, it is making use of its performance envelope and seems to have a good grasp of Pirelli's tyres.
At the post-race test the team installed a new engine cover, complete with inlet snorkels to feed either a new or relocated power unit cooler.
Lest we forget, Toro Rosso was all set to use the Renault power unit in 2016 but opted for the Ferrari unit when the relationship between Red Bull and Renault soured.
For much of the season it has been using an asymmetric cooling outlet at the rear of the car, most likely because the late change led to a sub-optimal internal layout.
It will therefore be interesting to see how the car's rear cooling is set up in the coming races if the new engine cover is retained.
Tyre development

Pascal Wehrlein, Mercedes AMG F1 W05 Hybrid Test Driver
Photo by: XPB Images
You might have noticed that Mercedes had two cars pounding the asphalt during testing, with the championship-winning W05 called out of retirement to test development tyres for next season.
The tyres in use were the current dimensions but with new compounds, as the tyre manufacturer looks to cover as many kilometres as it can to develop their new range for 2017.

Pirelli 2017 Tyre Testing Roadmap
Photo by: Pirelli
Development proper starts next month though with Mercedes, Ferrari and Red Bull all modifying cars to suit the wider tyres that will be used next season.
The roadmap above shows the intensity of this development programme, with efforts focused not only on dry weather tyres but the wet weather range too.
In general

Charles Leclerc, Ferrari SF16-H Test Driver
Photo by: XPB Images
You'll undoubtedly look at the metal rigs mounted to the cars and think, what purpose can they possibly serve?
Firstly, they're known as kiel probe arrays, and measure pressure stagnation and are preferred over pitot tubes (another airflow-measuring device we see on the cars at every race), because they're less affected by yaw angle.
These arrays are used to understand the airflow map, collecting masses of data points at various speeds and angles that can be used to correlate data collected in CFD and the wind tunnel.
They are a good indicator of where on the car the team are either struggling or want to add performance, with the data collected giving the engineers invaluable real world data to work with.
We want your opinion!
What would you like to see on Motorsport.com?
Take our 5 minute survey.
- The Motorsport.com Team
Read and post comments
Read also :
Share Or Save This Story
Copy link
Share on Viber
Previous article Ocon not getting carried away by Renault speculation
Next article Mazepin hopes Silverstone test showing proved potential
Top Comments
There are no comments at the moment. Would you like to write one?
View More & Comment

More from
Matt Somerfield

Gallery: How F1 tech evolved during the 2024 season
Formula 1
Formula 1 Dec 31, 2024
Gallery: How F1 tech evolved during the 2024 season

How McLaren’s rear wing push changed the game in F1
Formula 1
Formula 1 Dec 20, 2024
How McLaren’s rear wing push changed the game in F1

How 2026 F1 rules will help avoid identikit designs
Formula 1
Formula 1 Dec 16, 2024
How 2026 F1 rules will help avoid identikit designs

More from
Renault F1 Team

Top 10 F1 cars of the 1980s
Formula 1
Top 10 F1 cars of the 1980s

Does Daniel Ricciardo regret leaving Red Bull for Renault?
Formula 1
Formula 1
United States GP
21 d
Does Daniel Ricciardo regret leaving Red Bull for Renault?

On this day: Fernando Alonso wins the world title, Michael Schumacher retires from F1
Formula 1
Formula 1
Brazilian GP
28 d
On this day: Fernando Alonso wins the world title, Michael Schumacher retires from F1
Latest news

F1 Las Vegas GP: George Russell pips Pierre Gasly in tricky FP2
Formula 1
F1 Formula 1
Las Vegas GP
1 h
F1 Las Vegas GP: George Russell pips Pierre Gasly in tricky FP2

Five drivers set for grid penalties for engine changes at F1 Las Vegas GP
Formula 1
F1 Formula 1
Las Vegas GP
2 h
Five drivers set for grid penalties for engine changes at F1 Las Vegas GP

Cadillac scraps V6 F1 engine, delays entry as PU manufacturer
Formula 1
F1 Formula 1
Las Vegas GP
3 h
Cadillac scraps V6 F1 engine, delays entry as PU manufacturer
Feature
Discover prime content

Top 10 F1 cars of the 1980s
Formula 1
By Kevin Turner
Top 10 F1 cars of the 1980s
Subscribe and access Motorsport.com with your ad-blocker.
From Formula 1 to MotoGP we report straight from the paddock because we love our sport, just like you. In order to keep delivering our expert journalism, our website uses advertising. Still, we want to give you the opportunity to enjoy an ad-free and tracker-free website and to continue using your adblocker.
You have 2 options:
- Become a subscriber.
- Disable your adblocker.
Subscribe now Already subscribed? Sign in here
Already disabled your adblocker?
Reload page
Manage Alerts
Subscribe



