Analysis
Formula 1
Revealed: Alpine's aggressive F1 aero updates for Imola
Alpine has arrived at Imola with yet more parts to test as it looks to recoup the losses that all teams were subjected to by the new aerodynamic regulations for this season.
Giorgio Piola Matt Somerfield
Edited: Apr 16, 2021, 10:32 AM
Copy link
Share on Viber

This comes off the back of an intensive test program that the former Renault F1 team undertook a few weeks ago in Bahrain as it endeavors to return to the sharp end of the grid.
The updated parts that will be tested by Alpine in Imola focus on the front end of the car this time, rather than the floor as they did a few weeks ago. Although, that’s not to say that those parts won’t once again be drawn into their test program, as the team looks for ways to improve the global performance of the car.
Read Also:
- Are Z-shaped floors the way to go in F1 2021?
- How Mercedes is trying to claw back its lost downforce
The team have two options when it comes to the design of their front wing endplate, with a notch taken out of the upper rear corner on one design and not the other (red arrow). This is a design feature we’ve seen deployed by various teams since the regulations changed in 2019 and has an impact on the ‘outwash effect’ that teams are continuously tweaking in order to improve flow past the front tyre and refine the flow received by the floor downstream.
Alpine A521 front wing comparison
Photo by: Giorgio Piola
The team has also made changes to the shape of the front wing flaps at the inboard end (highlighted in green), with a new more curled-over design available for the team to trial at Imola. Changes made here are usually made in order to alter the shape and direction of the Y250 vortex, which is shed from the juncture of the front wing’s neutral section and mainplane section below.
Correlating with the front wing flap shape changes are alterations to the design of the cape too, with a revised inlet found in the central section (blue arrow), whilst a spear-like slat has also been added to the side of the cape (red arrow, inset).
Tech flashback to Bahrain trials
Alpine has already made significant changes to the A521 since it was first unveiled, with a slew of new parts tested during the first race weekend of the season. This resulted in it joining the growing ranks of teams using the Z-shaped floor cutout, with the team then pairing it with various other test items as it looked for the optimum level of performance from that area of the car.
Alpine A521 Floor comparison
Photo by: Uncredited
The floor tested during pre-season didn't have the Z-shaped cutout or fins (V1 and blue circle respectively). But, having installed a floor with the cutout, the team tested two other solutions.
V2 not only had the two silver-coloured fins mounted side-by-side and offset from one another, it also had two shorter triangular shaped fins mounted further downstream (red arrows). It decided to race a slightly less aggressive solution though, with just a single fin mounted on the edge of the floor cutout (V3).
A batch of solutions were also tested just ahead of the rear tyre too, with the single element strake used during the preseason test cast aside (V1), firstly in favour of the trio of strakes used during the back end of the preseason test (V2) and then in a combination test with two other solutions (V3 & V4).
V3 and V4 both have four sections to them, albeit in a slightly different way, with V3 only having slots a portion of the way down the surface, whilst V4 is made of four individual strakes.
We want your opinion!
What would you like to see on Motorsport.com?
Take our 5 minute survey.
- The Motorsport.com Team
Read and post comments
Read also :
Share Or Save This Story
Copy link
Share on Viber
Previous article Verstappen wants talks over FIA's 'messy' F1 track limits policing
Next article Alonso: I need to improve myself more than Alpine car
Top Comments
There are no comments at the moment. Would you like to write one?
View More & Comment
More from
Giorgio Piola

The fascinating story behind McLaren's most iconic F1 car
Formula 1
Formula 1 Apr 3, 2024
The fascinating story behind McLaren's most iconic F1 car

Emilia Romagna GP: F1 technical images from Imola's pitlane
Formula 1
Formula 1
Emilia Romagna GP
Apr 21, 2022
Emilia Romagna GP: F1 technical images from Imola's pitlane

The F1 downforce choices that proved key at the Saudi GP
Formula 1
Formula 1
Saudi Arabian GP
Mar 29, 2022
The F1 downforce choices that proved key at the Saudi GP

More from
Alpine

"Colapinto never hit the apex" – Audi's take on contentious Nico Hulkenberg penalty in Brazilian GP
Formula 1
Formula 1
Sao Paulo GP
6 d
"Colapinto never hit the apex" – Audi's take on contentious Nico Hulkenberg penalty in Brazilian GP

A fond farewell to a few WEC favourites
WEC
Monza
A fond farewell to a few WEC favourites
Latest news

Rodney Childers pushes back on NASCAR CEO's claims about car comparisons
NASCAR Cup
NAS NASCAR Cup 1 h
Rodney Childers pushes back on NASCAR CEO's claims about car comparisons

“He’s beaten Alpine on his own” - Racing Bulls on why it kept Liam Lawson
Formula 1
F1 Formula 1
Las Vegas GP
5 h
“He’s beaten Alpine on his own” - Racing Bulls on why it kept Liam Lawson

CrowdStrike Racing by APR keeps title-winning IMSA LMP2 roster intact for 2027
IMSA
IMSA IMSA 5 h
CrowdStrike Racing by APR keeps title-winning IMSA LMP2 roster intact for 2027
Feature
Discover prime content
Subscribe and access Motorsport.com with your ad-blocker.
From Formula 1 to MotoGP we report straight from the paddock because we love our sport, just like you. In order to keep delivering our expert journalism, our website uses advertising. Still, we want to give you the opportunity to enjoy an ad-free and tracker-free website and to continue using your adblocker.
You have 2 options:
- Become a subscriber.
- Disable your adblocker.
Subscribe now Already subscribed? Sign in here
Already disabled your adblocker?
Reload page
Manage Alerts
Subscribe





